Skip to content

Fujifilm Firmware Updates for Several Cameras (X-T5 included), XF16-55, FT-XH and Promises More Firmware Love to Come in 2024

Share

Fujifilm has released firmware updates for Fujifilm X-T5, X-T4, X-T3, X-H2, X-H2S, X-S20, X-S10 and XF16-55mmF2.8 as well as the Fujifilm FT-XH File transmitter grip.

It’s mainly (but not only) a video centric update and more lenses will get the same update in February (XF16-80mmF4 and XF18-120mmF4).

Moreover, in their recent official X Summit announcement, Fujifilm said they are “currently considering further enhancements“, which I hope will translate also on firmware love for those, who mainly use Fujifilm cameras for stills.

Firmware Details & Download Links

FUJIFILM X-T5 Ver.2.10 – download here
The firmware update Ver.2.10 from Ver.2.03 incorporates the following issues:

  1. Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
    [Target interchangeable lens] ・XF16-55mmF2.8 R LM WR:Ver.1.30 or later
    Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
  2. The firmware bug is fixed that a white horizontal line appears on the preview image in the LCD monitor when shooting with the focus point locked by touch panel operation.
  3. The firmware bug is fixed that the LED catchlight of the FLASH stays illuminated when the SHOE MOUNT FLASH is attached and photographed under the following setting conditions.
    ・SHUTTER TYPE:ES ELECTRONIC SHUTTERES
    ・DRIVE SETTING:High-speed burst or Low-speed burst
    ・LED light:CATCHLIGHT
  4. The firmware bug is fixed that the camera does not synchronize properly depending on the shutter speed setting when shooting with “EF E-FRONT CURTAIN SHUTTER” with SHOE MOUNT FLASH (EF-60) attached.
  5. Other minor bugs are fixed.

FUJIFILM X-T4 Ver.2.10 – download here
The firmware update Ver.2.10 from Ver.2.01 incorporates the following issues:

  1. Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
    [Target interchangeable lens] ・XF16-55mmF2.8 R LM WR:Ver.1.30 or later
    Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
  2. Other minor bugs are fixed.

FUJIFILM X-T3 Ver.5.10 – download here
The firmware update Ver.5.10 from Ver.5.01 incorporates the following issues:

  1. Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
    [Target interchangeable lens] ・XF16-55mmF2.8 R LM WR:Ver.1.30 or later
    Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
  2. The firmware bug is fixed that a image becomes abnormal color tone in rare cases under the following configuration conditions.
    ・SHUTTER TYPE:ES ELECTRONIC SHUTTERES
    ・DRIVE SETTING:High-speed burst
    ・AF/MF SETTING:RELEASE PRIORITY or MF
    ・SHUTTER SPEED:1/2.5, 1/5 or 1/6
  3. Other minor bugs are fixed.

FUJIFILM X-H2 Ver.3.10- download here
The firmware update Ver.3.10 from Ver.3.03 incorporates the following issues:

Refer to “X-H2 New Features Guide” and “X-H2S Network and USB Setting” for operating instructions and explanations on the revised items described in the item No.1, No.2 and No.3 below.

・X-H2 New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic
・X-H2 Network and USB Setting: English, Français, Deutch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

  1. The “TIME CODE SYNC. SETTING” option is added to “TIME CODE SETTING” in the movie mode to allow time code synchronization with external devices.
    This allows connection to the ATOMOS AirGlu accessory, “UltraSync BLUE” via Bluetooth. In addition, timecode synchronization with multiple cameras (up to 6 cameras) is possible by acquiring timecode from “UltraSync BLUE”.
  2. The connection procedure and display function at remote recording are improved when using File Transmitter FT-XH as follows.
    (1)Connection setting gets easier to use the Remote Rec Function by reading the QR code displayed on the camera with the tablet’s camera app to obtain the MAC address and IP address of the camera automatically.
    (2)A “MULTI” button is added to the “Remote Rec Function” menu. Pressing this button splits the screen display into four sections, allowing you to watch Live Views of multiple cameras simultaneously and pressing the “SINGLE” button bring back to the single screen display.
    (3)A “Clean display mode” is added to the “Remote Rec Function” menu. When “Clean display mode” is selected, only the Live View is displayed.
    Note:The firmware of the File Transmitter FT-XH must be upgraded to the latest version to enable those functions above. Be sure to update the camera’s firmware to the latest version before updating the firmware for the File Transmitter FT-XH.
  3. The smartphone icon and Bluetooth icon are now displayed on the camera’s display screen when the camera and smartphone are connected via Bluetooth.
  4. Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
    [Target interchangeable lens] ・XF16-55mmF2.8 R LM WR:Ver.1.30 or later
    Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
  5. Other minor bugs are fixed.

FUJIFILM X-H2S Ver.5.10 – download here
The firmware update Ver.5.10 from Ver.5.03 incorporates the following issues:

Refer to “X-H2S New Features Guide” and “X-H2S Network and USB Setting” for operating instructions and explanations on the revised items described in the item No.1, No.2 and No.3 below.

・X-H2S New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic
・X-H2S Network and USB Setting: English, Français, Deutch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

  1. The “TIME CODE SYNC. SETTING” option is added to “TIME CODE SETTING” in the movie mode to allow time code synchronization with external devices.
    This allows connection to the ATOMOS AirGlu accessory, “UltraSync BLUE” via Bluetooth. In addition, timecode synchronization with multiple cameras (up to 6 cameras) is possible by acquiring timecode from “UltraSync BLUE”.
  2. The connection procedure and display function at remote recording are improved when using File Transmitter FT-XH as follows.
    (1)Connection setting gets easier to use the Remote Rec Function by reading the QR code displayed on the camera with the tablet’s camera app to obtain the MAC address and IP address of the camera automatically.
    (2)A “MULTI” button is added to the “Remote Rec Function” menu. Pressing this button splits the screen display into four sections, allowing you to watch Live Views of multiple cameras simultaneously and pressing the “SINGLE” button bring back to the single screen display.
    (3)A “Clean display mode” is added to the “Remote Rec Function” menu. When “Clean display mode” is selected, only the Live View is displayed.
    Note:The firmware of the File Transmitter FT-XH must be upgraded to the latest version to enable those functions above. Be sure to update the camera’s firmware to the latest version before updating the firmware for the File Transmitter FT-XH.
  3. The smartphone icon and Bluetooth icon are now displayed on the camera’s display screen when the camera and smartphone are connected via Bluetooth.
  4. Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
    [Target interchangeable lens] ・XF16-55mmF2.8 R LM WR:Ver.1.30 or later
    Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
  5. Other minor bugs are fixed.

FUJIFILM X-S20 Ver.1.20 – download here
The firmware update Ver.1.20 from Ver.1.13 incorporates the following issues:

  1. Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
    [Target interchangeable lens] ・XF16-55mmF2.8 R LM WR:Ver.1.30 or later
    Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
  2. Other minor bugs are fixed.

FUJIFILM X-S10 Ver.3.10 – download here
The firmware update Ver.3.10 from Ver3.01 incorporates the following issues:

  1. Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
    [Target interchangeable lens] ・XF16-55mmF2.8 R LM WR:Ver.1.30 or later
    Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
  2. Other minor bugs are fixed.

XF16-55mmF2.8 R LM WR Ver.1.30- download here
The firmware update Ver.1.30 from Ver.1.20 incorporates the following issue:

  1. Exposure tracking during zoom operation is improved when using the following cameras.[Applicable cameras]X-H2S (Ver.5.10 or later), X-H2 (Ver.3.10 or later), X-T5 (Ver.2.10 or later), X-T4 (Ver.2.10 or later), X-T3 (Ver.5.10 or later), X-S20 (Ver.1.20 or later) and X-S10 (Ver.3.10 or later)
    Note:Make sure to update the camera’s firmware to the latest version before updating the firmware of the interchangeable lens to enable those functions above.

File transmitter FT-XH Ver.2.10 – download here
The firmware update Ver.2.10 from Ver.2.00 incorporates the following issue:

  1. The connection procedure and display function at remote recording are improved when attaching to X-HS2 or X-H2 camera.(1)Connection setting gets easier to use the Remote Rec Function by reading the QR code displayed on the camera with the tablet’s camera app to obtain the MAC address and IP address of the camera automatically.
    (2)A “MULTI” button is added to the “Remote Rec Function” menu. Pressing this button splits the screen display into four sections, allowing you to watch Live Views of multiple cameras simultaneously and pressing the “SINGLE” button bring back to the single screen display.
    (3)A “Clean display mode” is added to the “Remote Rec Function” menu. When “Clean display mode” is selected, only the Live View is displayed.[Applicable cameras] ・X-H2S firmware update:Ver.5.10 or later
    ・X-H2 firmware update:Ver. 3.10 or laterNote:Make sure to update the camera’s firmware to the latest version before updating the firmware for the File Transmitter FT-XH.
Share